Troubleshooting a Kenmore Washer That Won’t Spin
If you own a Kenmore washer, you know how important it is for it to be running smoothly. But what should you do when your Kenmore washer won’t spin? Don’t worry—we’ve got the answers! Here, we’ll discuss some of the most common reasons why your washer may not be spinning and provide solutions for each issue.
Clogged Pump Filter or Drain Hose
One of the most common causes of a washer failing to spin is a clog in either the pump filter or drain hose. The pump filter can become clogged with lint, dirt, detergent residue and other debris that accumulates over time, while the drain hose can become blocked by knots or kinks. To fix this issue, unplug your washer and locate the pump filter near the bottom of the front panel; remove any debris from inside and around it. Then, check the drain hose for kinks or knots and straighten them out if necessary.
Lid Switch Failure
Another cause of a washer not spinning could be due to lid switch failure. The lid switch is located inside the cabinet at the top left corner of the machine. It is activated when you close the lid on your washer; if it fails to activate then your machine will not spin. To fix this issue, first unplug your machine and examine the lid switch closely; if it looks damaged or worn out then replace it with a new one. You may also need to check for any blockages in the switch itself that might be preventing it from activating properly.
Drive Belt Issues
Your drive belt may also be causing your Kenmore washer to not spin properly. This belt helps transfer power from the motor to turn parts like pulleys and gears inside your machine in order to spin clothes during a wash cycle. If this belt becomes worn out or damaged then it will need to be replaced; however, before doing so you should always refer to your owner's manual for specific instructions on how to replace this type of part safely and correctly.
Conclusion:
A Kenmore washer that won't spin can be an annoying problem but luckily there are usually easy fixes available for each issue! Common causes include a clogged pump filter/drain hose, lid switch failure, or drive belt issues — all of which can usually be resolved quickly with just a few simple repairs and adjustments. We hope these tips help get your washing machine back up-and-running again soon!
You might also like
